It is very common to have clients that are looking for a home inspection to want to purchase every service that we have to offer. I don’t believe on selling a client a service that they may not need. Don’t getme wrong. I am in business to make money but only honestly not using scare tactics to increase our revenue. If you need a radon measurement because your area is known to have high levels then I would advise you to purchase a radon measurement. Have you seen mold or mildew in the home when you were looking at it? Then you might want to get a mold inspection or testing. My client from the Gurnee home inspection was dead set on getting every service that we offered. I explained that buying every inspection service we offer should not be done without doing your homework.
You ask how I get this info to make my decision. Below are the check points for the various inspection services.
- Mold inspection or testing should be done if the home smells musty in certain areas like crawl spaces, attics or garages that are attached. If you see any areas that may have surface mildew or mold then you might want to add a mold inspection to your home inspection. If you see any areas that have moisture penetration into the attic or window flashing’s that may have been there for awhile may be a reason for a mold inspection. If your home inspector thinks that the basement may have had water penetration or flooding then purchase a mold inspection.
- Asbestos pipe wrapping, asbestos tiles, asbestos shingles and other asbestos products were used up to 1988 and generally are not found. If you have a basement and the tile floor is 9″ x 9″ then the probability that those tiles are asbestos is very high. Asbestos tiles and pipe wrapping is not an issue unless it is disturbed. If the basement has seen flooding or any water that has sat on the asbestos tile for any time then the tiles may be brittle. Brittle tiles that are chipping may pose issues and should be inspected by a professional asbestos inspector.
- Radon gas measurement is a service that we offer and we do hundreds of tests a year. The results vary depending on where the property is that we are performing a radon measurement. I believe that the presence of dirt crawl spaces or any crawl space does increase your potential for a possible higher radon measurement number. Sump pumps are another contributor to higher readings in radon measurements and always suggest to my clients that these sump and ejector pits be sealed properly. Gaps in the connection of foundation walls and basement floors will allow the possibility of higher radon measurement numbers.
Lead paint was used in homes and buildings up to 1978 but was still seen up to 1980. Lead paint can be tested a home inspector with a non-invasive testing method. Carve testing is the proper way to test for lead paint but cannot be done at a home inspection. My client from the Gurnee home inspection was concerned about lead paint because he had a 2 year old son that could be harmed by lead paint. Lead paint is known to harm children under the age of 5 years. Lead paint can’t be verified by just looking at it.
As you can see there are kinds of items you need to look for before you start ordering every service your home inspector offers. My client from the Gurnee home inspection was ready to hand over $1050.00 for every home inspection service we offer. The Gurnee home inspection service fee was $600.00. He purchased our standard home inspection and a mold inspection. Money doesn’t grow on trees so make sure you know what you need. Hopefully this was helpful for all of my readers. If you have further questions about what type of home inspection services you need then please contact me at ~ The Thermal Home Inspector or 312-961-4228.
Thanks for stopping by and stay safe