Jim Kolke Thermal Home Inspector

Mold in an attic can be a harmful issue if not corrected

It’s been a busy year but I’ve afforded time to start blogging about what has occurred this year while performing home inspection in Wilmette Illinois and other cities in the Chicago land area.  Many of the home inspections that I perform deliver less than favorable results to my clients.  Some of the worst issues that come up on home inspections are ~  mold in attics, cracks in foundations, high radon levels, damaged roofs that will require replacement and old furnaces and air conditioners that will require replacement.  These issues area probably some of the more expensive items that may require replacement at  a potential home inspection.

Unfortunately, while performing a home inspection in Wilmette on a foreclosure property all of these issues were named in the inspection report which caused my client to cancel the contract.  This happened to be the 2nd home inspection for my clients at a cost of $625.00 per home inspection.  I was frustrated for my clients because I know money does not grow on trees.  I discounted the service fee (which I never do) because they were first time buyers and they did not know what to look for when looking at homes.  This article will touch on some of the major items that could be found in your potential home inspection.  Before you submit an offer please look at the areas below to prevent loss of funds to perform a home inspection.

  • Mold in attics ~ Mold in attics is more common than most people may think.  If you are driving around looking at homes a step stool may worth putting in your trunk with a flashlight to look in attics to see if mold may be an issue in a home you are interested in.  Mold can become an issue in attics from bathroom fans being vented into the attic and poor ventilation.  You might be able to see if the bathrooms are vented to the attic while looking into the attic.  Mold removal can be very expensive depending on how much mold is found.  This happened to be one of the major issues at the Wilmette home inspection I performed.
  • Cracks in foundations ~ Cracks in foundations generally occur due to poor grading around the homes foundation or the lack of leaders.  If the basement is unfinished then take your flashlight and walk the perimeter of the basements foundation and see if there any cracks.  Not every home will allow the luxury of inspecting the foundation due to the basement being finished.  The home inspection I performed in Wilmette had 6 cracks in the foundation that would require epoxy injection.  Epoxy injection repairs generally cost $400.00 per crack and as you can see can add up very quickly.
  • Radon levels ~ A radon level above 4 picocuries per liter (pCi/L) is the EPA’s recommended level for action.  This basically means that a radon mitigation system will be needed to be installed into the homes foundation to lower the levels.  Radon mitigation systems can cost up to $3000.00 for complex systems.
  • Damaged roofs ~ before walking into your possible dream home take a look at the roof and see if the shingles seem wavy or cracked.  If this is what you see then the chances are you may need a new roof.  Roofs may cost up to $20,000.00 depending on how large the home is and should be built into your offer price for the property.
  • Old furnaces and old air conditioners may require replacement ~ Check the tags on the furnace and the air conditioner to determine the age of the units.  If the units are older than 20 years then you should plan on replacing these items while presenting your offer.  This was another issue that did make the report for the clients at the Wilmette home inspection.  Furnaces and air conditioners can cost $3000.00 and up depending on large the unit is and how many you may require.

As you can see these are real dollar issues that can “make or break or break a deal” very quickly.  Please follow what has been outlined in this article while looking at homes to prevent setting yourself up for failure at your home inspection.  If you have questions please contact me at The Thermal Home Inspector or 847-251-1186.

Thanks for stopping by and have a great day.

~Jim Kolke~